Ardex P82 Ready Mixed Rapid Drying Primer

ARDEX P 82 is a two-component, water-based epoxy synthetic dispersion primer and bonding bridge that is non-flammable and non-corrosive. It is specifically designed to create a strong priming and bonding layer on various substrates, particularly smooth or dense surfaces. Intended for interior use only, ARDEX P 82 is suitable for dry or intermittently damp areas and can be applied on floors with an effective ARDEX damp proof membrane, such as ARDEX DPM 1 C and ARDEX DPM 1 C R. This primer is an ideal preparation layer before applying ARDEX’s range of cement-based tiling and flooring products.

Key Points

1. Two-Component Epoxy Primer: ARDEX P 82 is a water-based epoxy synthetic dispersion primer and bonding bridge.
2. Priming and Bonding Layer: Designed for smooth or dense surfaces, forming a strong bond on various substrates.
3. Interior Use Only: Suitable for dry or intermittently damp locations, for use on floors with ARDEX damp proof membranes.
4. Prepares for Tiling and Flooring: Acts as a primer before the application of ARDEX’s cement-based tiling and flooring products.

Coverage: ARDEX P 82 provides coverage of 5 to 10 m² per kg of mixed primer, depending on the surface and application method. A 2 kg unit covers approximately 10 to 20 m², and a 6 kg unit covers 30 to 60 m². However, it is important not to exceed the maximum coverage of 10 m² per kg to ensure a continuous, even film across the entire surface. To maintain proper coverage, it is recommended to measure floor areas into 60 m² sections and evenly distribute a 6 kg unit of ARDEX P 82 over each section to avoid exceeding 10 m² per kg of mixed material.

Storage and Shelf Life: ARDEX P 82 has a storage life of at least 12 months when kept in its original, unopened containers.

For more in our range of mortars, please click here. For our full range of Ardex products, click here.

Alternatively, you can visit the Ardex website by clicking here.