Mapei Eporip B

Eporip B is a solvent-free epoxy adhesive made up of two pre-measured components—resin (component A) and hardener (component B)—that must be mixed prior to application. This adhesive has a slightly thixotropic paste consistency, allowing for easy application by brush on both horizontal and vertical surfaces. Eporip cures without shrinkage, resulting in a waterproof bond that exhibits excellent dielectric properties and high mechanical strength, making it suitable for bonding concrete and steel. Additionally, Eporip complies with the requirements outlined in EN 1504-9 for the protection and repair of concrete structures and meets the minimum standards set by EN 1504-4 for structural bonding.

Key Points:

Composition: Eporip B consists of two pre-measured components—resin and hardener—that must be mixed before use.

Application: The slightly thixotropic paste can be applied by brush on horizontal and vertical surfaces.

Properties: It polymerizes without shrinkage, providing a waterproof bond with excellent dielectric properties and mechanical strength.

Compliance: Eporip meets the requirements of EN 1504-9 and the minimum standards of EN 1504-4 for structural bonding.

For more in our range of adhesives, please click here. For our full range of Mapei products, please click here.

Alternatively, you can visit Mapei’s website here.